Traction bars are a necessary upgrade when increasing the horsepower on your diesel truck or towing heavy to prevent the axle from twisting which can lead to broken u-joints, pinion yokes, driveshafts, and even twisted axle housings. Our traction bar brackets bolt on to the bottom of the axle tube via the axle u-bolts and weld to the frame on the front end. We use a high quality RockJock rebuild-able and grease-able Johnny Joint heim connection at the frame to allow for adjustment of torsion on the axle or if you raise/lower the rear of your truck. At the axle connection we use a heavy duty Poly Urethane Bushing for decreased noise and vibration which is common complaint if a solid heim is used on both ends. Grade 8 hardware connects the bars to the mounts on the frame and axle. We complete our traction bar kit with our professional in house powder coat process in your color choice and comes standard with a epoxy Primer base coat before the final color which increases corrosion resistance by more than ten times compared to just your standard powder single coat application.
Additional Attributes:
GTIN:
Material: 1 7/8 in. 180 wall DOM Steel Tube
Length: 68
Mounting Hardware Included: Yes
Box 1 Dims & Weight: 72x6x6 in., 42 lbs.
Box 2 Dims & Weight: 20x8x8 in., 15 lbs.
Finish: Powder Coated
Prop 65 Y/N: Y
Requires Welding: Yes
Ships in Multiple Boxes: Yes
Extended Information:
Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 72 x 6 x 6 inches
Weight: 42 PG
